Certified Quality
ISO 9001 CQC certification, Type I export packaging licences and industrial production permits across the range.
Industrial Packaging · Suzhou, China
Drums built to carry what others can’t.
Jinglin Container manufactures 20L–208L HDPE plastic drums, galvanised and lacquered steel drums, and 1000L IBC totes for the chemical, pharmaceutical, food and coatings industries — certified, tested and shipped worldwide from the Yangtze River Delta.
20–208LCapacity range
ISO 9001CQC certified
4Product families
80Drums per 20 ft
Why Jinglin
A packaging partner, not just a drum supplier
From the first technical question to the last container loaded, one team owns your order. We match resin, sheet gauge, coating and closure to the product you actually fill — so the drum performs on the line and in the warehouse, not only on the spec sheet.
Automated Production
Multiple automated blow-moulding, welding and coating lines with in-line testing for drop, stacking, airtightness and pressure.
Full Material Choice
HDPE, galvanised steel, lacquered steel and composite IBC — one supplier for every packaging line in your plant.
Export-Ready Logistics
Cube-optimised dimensions, 80 drums per 20-foot container, and documentation prepared for international shipments.
Taoyuan Town · Suzhou · Jiangsu
About Jinglin
On the shore of Taihu Lake, at the centre of the Delta
Jinglin Container (Suzhou) Co., LTD sits in Taoyuan Town, Wujiang District — a water town in the heart of the Yangtze River Delta, north of Suzhou, south of Hangzhou and east of Shanghai. National highways 318 and 320 pass close by, giving us fast access to both the port of Shanghai and the region’s chemical and coatings clusters.
- State-approved manufacturer of packaging containers
- Certified to ISO 9001 by CQC, the China Quality Certification Centre
- Export Commodity Packaging Container Quality Licence (Type I)
- Dangerous goods packaging and container production registration
Product Range
Four families, one quality standard
Twenty-five litres to a thousand. Whatever your product’s viscosity, chemistry or destination, there is a container in the range built for it.
Plastic
208L Closed-Head Plastic Drum (Double Ring)
Twin-ring 200L HDPE tight-head drum for chemicals, additives and edible oils.
- 200 L
- ≥ 210 L
- 585 mm
Plastic
160L Open-Top Plastic Drum (Blue)
Wide-mouth 160L open-head drum with 390 mm lid for powders and pastes.
- 160 L
- ≥ 167 L
- Φ512 mm
Steel
Closed-Head Galvanised Steel Drum
Zinc-coated tight-head steel drum for solvents, lubricants and edible oils.
- Cold-rolled sheet and steel strip, W-bead expansion process
- 0.8 – 1.2 mm (body, bottom and lid can be combined)
- White galvanised or iridescent (rainbow) galvanised
Steel
Open-Head Lacquered Steel Drum
Painted open-top drum with removable lid for viscous and solid products.
- Cold-rolled steel sheet, welded body
- 1.0 mm standard (0.8 – 1.2 mm on request)
- Baked lacquer, printed or plain
IBC
IBC Tote — New & Reconditioned
1000L composite IBC with HDPE inner bottle and galvanised steel frame.
- 1000 L
- HDPE, grade 4570UV (UV stabilised, non-toxic, easy to clean)
- Hot-dip galvanised steel tube (51D+Z / 53D+Z grades)
Plastic
25L Plastic Drum
25L rectangular HDPE drum in blue or white with a Φ4.8 mm cap.
- 25 L
- ≥ 27 L
- 291 × 262 mm
Applications
Where our containers go to work
Our drums are qualified for products that punish poor packaging — aggressive solvents, food-grade oils and everything in between.
Chemicals
Solvents, intermediates, additives and water-treatment reagents.
Pharmaceuticals
Excipients, intermediates and clean-room packaging supply.
Food & Beverage
Edible oils, syrups, juice concentrates and honey.
Coatings & Inks
Paints, resins, thinners and adhesive systems.
20LSmallest standard drum
208LLargest single drum
1000LIBC capacity
4Test programmes per line
How We Work
From enquiry to container in four steps
A short, visible process — you always know which stage your order is at.
01
Technical review
You tell us the product, filling temperature, volume and destination. We propose container, resin grade and closure.
02
Sample & approval
Pre-production samples for your filling trial, with colour, print and lining confirmed in writing.
03
Production & test
Automated moulding or welding, in-line inspection, and drop, stacking, airtightness and pressure checks.
04
Packing & shipping
Palletised for cube efficiency, loaded per your container plan, with export documentation prepared.
Common Questions
Answers before you ask
What is your minimum order quantity?
A standard order fills one 20-foot container — around 80 units of 200L drums, or 18–20 IBC totes. Smaller trial quantities can be arranged for first orders; we will quote the most economical option for your volume.
Are your drums certified for export and dangerous goods?
Yes. Our plastic drums hold the Type I Export Commodity Packaging Container Quality Licence, the National Industrial Product Production Licence and the Dangerous Goods Packaging and Container Production Enterprise registration, alongside food-contact hygiene approval. Certificates are supplied with each shipment on request.
How long does production take?
Standard products ship in roughly 15–25 working days after artwork sign-off. Custom colours or printed drums add a sampling step of about 7–10 days. We confirm exact dates with the quotation.
Can you help me choose the right container?
That is what the enquiry form is for. Tell us what you fill, at what temperature, in what volume and where it ships. We will recommend the material, gauge, coating and closure — and flag anything that needs a compatibility test.
Tell us what you fill. We’ll tell you what to pack it in.
Send your product details, target volume and destination country. Our export team replies within one business day with a specification and an indicative price.